|
|
|
#1
|
||||
|
||||
Does anybody have one of these in their W124 or W210??
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=120373252119
I'm curious what this looks like installed. Since the 95's don't have a glove box something back in the trunk might come in handy. Says it's an OEM piece, so I thought somebody might have one.
__________________
Jimmy L. '05 Acura TL 6MT 2001 ML430 My Spare Gone: '95 E300 188K "Batmobile" Texas Unfriendly Black '85 300TD 235K "The Wagon" Texas Friendly White '80 240D 154K "China" Scar engine installed '81 300TD 240K "Smash" '80 240D 230K "The Squash" '81 240D 293K"Scar" Rear ended harder than Elton John |
#2
|
||||
|
||||
Hard to tell without a photo of it installed.
With such a long list of cars it'll "fit", I'm guessing it'll not fit. It would be interesting to know what the Mercedes part number would be of this OEM piece, ... LOL! True that the lack of glovebox makes organizing things more difficult. I'm pretty partial to the spare-tire cavity for most permanent stuff, the side-pockets in this car could use a nice hinged cover though, that would make it all work better than what this piece appears to be.
__________________
Gone to the dark side - Jeff |
#3
|
||||
|
||||
Never heard of this thing. Is it supposed to fit in under the speakers in the rear "hat shelf?" I don't quite see how it is supposed to attach. If it really uses Velcro(R) to hang on the fabric liner then it won't take much weight.
I think I bought some of my W123 Hella headlamps from these people so I guess they're OK but not sure of this part.
__________________
"Buster" in the '95 Our all-Diesel family 1996 E300D (W210) . .338,000 miles Wife's car 2005 E320 CDI . . 113,000 miles My car Santa Rosa population 176,762 (2022) Total. . . . . . . . . . . . 627,762 "Oh lord won't you buy me a Mercedes Benz." -- Janis Joplin, October 1, 1970 |
#4
|
|||
|
|||
If it "fits" a W201 trunk I imagine it'll also "fit" the rest as well.....
__________________
Terry Allison N. Calif. & Boca Chica, Panama 09' E320 Bluetec 77k (USA) 09' Hyundai Santa Fe Diesel 48k (S.A.) |
#5
|
|||
|
|||
looks like the one i installed in my M roadster, mounts to the inside of the trunk lid.
http://www.mz3.net/articles/111.html |
#6
|
||||
|
||||
How much weight can you have in it and still have the trunk lid stay up?
__________________
"Buster" in the '95 Our all-Diesel family 1996 E300D (W210) . .338,000 miles Wife's car 2005 E320 CDI . . 113,000 miles My car Santa Rosa population 176,762 (2022) Total. . . . . . . . . . . . 627,762 "Oh lord won't you buy me a Mercedes Benz." -- Janis Joplin, October 1, 1970 |
#7
|
|||
|
|||
Potomac is a VERY reliable eBay seller and company in general and you can trust every word they post.
I have without problem.
__________________
Kent Christensen Albuquerque '07 GL320CDI, '10 CL550. '01 Porsche Boxster Two BMW motorcycles |
#8
|
|||
|
|||
I have no idea, but i'll probably buy one, so i will post about it if no else does it first.
|
#9
|
||||
|
||||
i got one from them a while ago ~~~ had a tough time finding a suitable deck lid liner for a coupe, still looking ~~~ thinking of cutting this and using on the sides of the trunk
instruction sheet which came with it: s-class (v-220) trunk lid organizer part number Q 6 75 0025 1) the trunk lid organizer is designed to adhere to the underside of the trunk lid using specialized velcro. use care not to allow the backing strips to touch carpeted surfaces prior to installation 2) open trunk lid on vehicle. align lid organizer as shown in in illustration #1. carefully center trunk lid organizer while maintaining backing several inches away from trunk lid liner. locate lower edge of trunk lid organizer on flat depressed surface of trunk lid liner. 3) carefully move trunk lid organizer torwards trunk lid liner until it touches and begins to attach. open trunk lid organizer pocket lids and use hands to firmly press inner pocket area to ensure even adhesion. in order to insure complete attachment use fingertips tto apply pressure within each pocket and over all backing surfaces and perimeter edges. this completes the installation. bottom note: manufactured by saratoga technologies inc. charlotte, n.c. for mercedes-benz usa, inc.
__________________
1989 300ce smoke silver / brazil, in a constant state of flux ~~~ Last edited by teezer; 02-08-2009 at 01:48 PM. |
#10
|
||||
|
||||
Ooh, conflict with the trunk triangle, FAIL.
Made for Mercedes-Benz but no Mercedes part number? We made things for Mercedes-Benz, requirement was for a star and Mercedes part number visible on any part made for Mercedes-Benz. Perhaps this is a dealer accessory and therefore not technically made for Mercedes-Benz (like a jacket for example)?
__________________
Gone to the dark side - Jeff |
#11
|
||||
|
||||
That is another problem with my '95. They have fabric/insulation on all surfaces inside the trunk. Well, it looks nice and I'm sure has some sound deadening properties. But I cannot install the Euro trunk triangle and bracket that I found in a Euro W124 at PNP the other day!! [Euro W124 had manual AC controls, a manual driver's seat with what looked like lumbar controls on the seat belt reciever and a very unique Becker radio]
So now I have a trunk triangle for the E300 and no way for it to attach! I would have little interest in that organizer if it velcro's in place. I thought it might hang under the speaker shelf and maybe the velcro held it against the fabric covering the fuel tank.
__________________
Jimmy L. '05 Acura TL 6MT 2001 ML430 My Spare Gone: '95 E300 188K "Batmobile" Texas Unfriendly Black '85 300TD 235K "The Wagon" Texas Friendly White '80 240D 154K "China" Scar engine installed '81 300TD 240K "Smash" '80 240D 230K "The Squash" '81 240D 293K"Scar" Rear ended harder than Elton John |
#12
|
||||
|
||||
The trunk triangle fits fine in the late 124, fits fine in my '94.
Cut two rectangles for the triangle's feet at the bottom, and cut out the outline of the clip at the top. Simple to remove the liner to do this, should take about an hour. The triangle lays flat over the trunk-lid lining. The fabric over the fuel tank has little support other than it's own stiffness. Not a mounting surface IMO.
__________________
Gone to the dark side - Jeff |
#13
|
||||
|
||||
I have that in my w210 its attached by velcro. I initially had it on my trunklid, but it always detached. The pockets are small and not too deep.
__________________
2005 SL65 1999 E300 1995 E300 1994 SL320 1988 560SL 1987 300TD 1982 300D 1955 300SL |
#14
|
||||
|
||||
Quote:
__________________
Jimmy L. '05 Acura TL 6MT 2001 ML430 My Spare Gone: '95 E300 188K "Batmobile" Texas Unfriendly Black '85 300TD 235K "The Wagon" Texas Friendly White '80 240D 154K "China" Scar engine installed '81 300TD 240K "Smash" '80 240D 230K "The Squash" '81 240D 293K"Scar" Rear ended harder than Elton John |
#15
|
||||
|
||||
You've got it!
__________________
Gone to the dark side - Jeff |
Bookmarks |
|
|