Due to some modifications on the front end, I will have to install the inner fender liners (front) by my own design. Pictures would be most appreciated showing the orientation of the splash guard in the fender.

This is w123 specific and I am not sure which models have them - probably the 300 series only.

Are there any inserts / clips that the mounting screws go into, or do they all go right into sheet metal?

thanks again.

__________________

I am truly shocked.

Any photos at all that even remotely illustrate the proper placement of the mud guards would be greatly appreciated.

__________________

Looks like there are clips that grab the lip of the fender and a bracket that gets screwed in.

__________________
Chad
2006 Nissan Pathfinder LE
1998 Acura 3.0 CL
OBK#44
"Pleasure in the job puts perfection in the work." - Aristotle (384-322 B.C.)

SOLD
1985 300TD - Red Dragon
1986 300SDL - Coda
1991 - 300TE
1995 - E320
1985 300CD - Gladys

http://www.peachparts.com/shopforum/showthread.php?t=231360

thanks for reminding me... you referred to them as "wheel-well liners"

__________________

Yeah, those just screw right into the metal with sheet metal screws.

__________________
Chad
2006 Nissan Pathfinder LE
1998 Acura 3.0 CL
OBK#44
"Pleasure in the job puts perfection in the work." - Aristotle (384-322 B.C.)

SOLD
1985 300TD - Red Dragon
1986 300SDL - Coda
1991 - 300TE
1995 - E320
1985 300CD - Gladys