|
|
|
#1
|
||||
|
||||
Seatbelt Warning LIght
This is a problem I noted after fixing the jumping/stalling trip odo...
After I replaced the seatbelt warning light bulb, and started the car, I was wearing no seat belt, and the light was on, but when I buckled the seatbelt, it glowed brighter... Any ideas on that one? Thanks!
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K Last edited by rrgrassi; 02-16-2009 at 10:00 AM. |
#2
|
||||
|
||||
Anyone?
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K |
#3
|
||||
|
||||
I had what appeared to be a strange ground issue after removing my instruments that caused the seat belt light to go on and off at random intervals. I pulled the bulb.
|
#4
|
||||
|
||||
When I had the cluster out, I cleaned the ground points. I guess I still need to run additional ground points from the cluster to the body.
All the other guages and lights work fine.
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K |
Bookmarks |
|
|