|
|
|
#1
|
||||
|
||||
Ignition broke, replaced it doesn't return from start properly.
Turn the key all the way over, spring turns it back, but not quite all the way. You have to turn it a hair to the left where it clicks into place and the climate control to come back on. Any suggested fixes?
__________________
http://superturbodiesel.com/images/sig.04.10.jpg 1995 E420 Schwarz 1995 E300 Weiss #1987 300D Sturmmachine #1991 300D Nearly Perfect #1994 E320 Cabriolet #1995 E320 Touring #1985 300D Sedan OBK #42 |
#2
|
||||
|
||||
The spring action is from the steering column lock, try removing the tumbler and grease the steering column lock. It's possible the tumbler was binding during your reinstall the last time. It took me a few tries to get it right when I had problems with mine a month or so ago.
__________________
85 300D turbo pristine w 157k when purchased 161K now 83 300 D turbo 297K runs great. SOLD! 83 240D 4 spd manual- parted out then junked |
#3
|
||||
|
||||
While you are doing that, check the fitment of the shut off switch. It could be on too tight causing the cam to bind up although that usually prevents you from turning the key over to 'start'
__________________
"I have no convictions ... I blow with the wind, and the prevailing wind happens to be from Vichy" Current Monika '74 450 SL BrownHilda '79 280SL FoxyCleopatra '99 Chevy Suburban Scarlett 2014 Jeep Cherokee Krystal 2004 Volvo S60 Gone '74 Jeep CJ5 '97 Jeep ZJ Laredo Rudolf ‘86 300SDL Bruno '81 300SD Fritzi '84 BMW '92 Subaru '96 Impala SS '71 Buick GS conv '67 GTO conv '63 Corvair conv '57 Nomad |
#4
|
||||
|
||||
Do what?
__________________
http://superturbodiesel.com/images/sig.04.10.jpg 1995 E420 Schwarz 1995 E300 Weiss #1987 300D Sturmmachine #1991 300D Nearly Perfect #1994 E320 Cabriolet #1995 E320 Touring #1985 300D Sedan OBK #42 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|