|
|
|
#1
|
||||
|
||||
123 armrest question
There is probably a better place (theoretically) to post this but this is where most folks who might know the answer hang out.
I have an 83 euro 300d seat which has no armrest and an 83 us spec seat with an armrest, can I unbolt the armrest from the us seat and bolt it onto the euro seat?
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#2
|
|||
|
|||
You can feel through the seat material if there is a bolt hole in euro seat. I switched a passenger back rest to the driver side and it had a bolt hole.
__________________
'85 300D Cal 280,000 miles '14 GLK 350 60000 miles |
#3
|
||||
|
||||
Yeah, I have felt that before. So there is a bolt in the armrest that can be backed out and the armrest applied to another seat?
Sounds good. Thanks very much!
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#4
|
||||
|
||||
IIRC, there is a bolt sticking out of the arm, with a nut. I believe you need to remove the seat back to gain access.
__________________
83 SD 84 CD |
#5
|
|||
|
|||
Be sure to check out all the seat belt stuff...
|
#6
|
|||
|
|||
To remove the arm rest, remove the seat back cover on the back. One screw and slide down the cover. Remove the nut holding the armrest. Check the back of the euro seat for the mounting hole and pin (up/down stop). You also could switch entire seat back.
__________________
Charles 1983 300D, bought new, 215k+ miles, donated to Purple Hearts veterans charity but I have parts for sale: http://www.peachparts.com/shopforum/showthread.php?t=296386 |
#7
|
||||
|
||||
Thanks for all the heads up's, gentlemen!
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|