Looking through the threads, I couldn't find any real info on this. The Lemfoerder mounts seem to be made for left and right (same part w/ two blue dots), but I've found other companies (Meyle, for instance) that make separate left and right mounts. The service manual calls out different left and right mounts for the W126 chassis - one blue dot on right, two blue dots on left, and different part numbers.

Is there any visible difference between the mounts (i.e. different screw locations)? Or is the difference shore hardness of the rubber? Will I notice any difference between a one dot or two dot mount on the right?

__________________
mjk

'84 300SD 119KMi (Liesl der Diesel)
'84 300D 326KMi when the oil left (former parts car)
'82 300SD 253KMi (new parts car)

I recently took a pair of new mounts to my Indy to have him install them. I don't know who made them. Anyway we both looked at the old ones that were still intalled in car and they looked different from eachother, but they were old and used up (distorted). Anyway he called the dealer and the dealer told him both mounts were the same and that is what I had, two identical ones in hand.

He installed them no problem. Hope this helps.

__________________
1982 300SD

Same part number. The shield on the top may be differant, but it does not get changed.
They will look differant comming out due to wear. But they are the same. on my 85, 83 and 81

__________________
83 300SD Dark Silver Dark brown inside

Same

__________________
1979 240D- 316K miles - VGT Turbo, Intercooler, Stick Shift, Many Other Mods - Daily Driver

1982 300SD - 232K miles - Wife's Daily Driver

1986 560SL - Wife's red speed machine