|
|
|
#1
|
|||
|
|||
knocking sound after valve adjustment
I just did a valve adjustment on my 85 300SD . It sounds beter and runs beter , it makes a loud ticking sound . It took me a little over 3 hours to do it . I finished it in the dark with one hand on the lite . Did i mess something up or what ???
|
#2
|
||||
|
||||
It could be something else making the noise but it is best to re-check the clearances.
You might simply have adjusted an Intake Valve the Exhaust Valve Clearances. It has happen to me before.
__________________
84 300D, 82 Volvo 244Gl Diesel |
#3
|
|||
|
|||
i heard one of the cyl the int & exh valve position were reversed, so most folks got her confused.Could it be the last one as its kind of out of sync.
__________________
|
#4
|
||||
|
||||
I always double check my gaps and nut torques on valve adjustments.
__________________
http://superturbodiesel.com/images/sig.04.10.jpg 1995 E420 Schwarz 1995 E300 Weiss #1987 300D Sturmmachine #1991 300D Nearly Perfect #1994 E320 Cabriolet #1995 E320 Touring #1985 300D Sedan OBK #42 |
#5
|
||||
|
||||
as good as I am, I still use the chart on dieselgiant's adjuster page... and write each one down as I go.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#6
|
|||
|
|||
I did use the chart and marked it with thumb print when i went to the next one , but like I said I finished at 9:00 at night . I was glad to have it done. Could made messed it up very easily . Thanks
|
Bookmarks |
|
|