|
|
|
#1
|
|||
|
|||
high pressure hose going from extension valve to receiver dryer
where would be a good place to find this. Dealer wants $110
does this hose have a name under which I can find it Last edited by trt; 06-24-2009 at 03:58 PM. |
#2
|
|||
|
|||
Click the above link [Buy Parts].
Also, check your local yellow pages under hydraulic hoses. Some of those shops also rebuild AC hoses.
__________________
Charles 1983 300D, bought new, 215k+ miles, donated to Purple Hearts veterans charity but I have parts for sale: http://www.peachparts.com/shopforum/showthread.php?t=296386 |
#3
|
|||
|
|||
I found it for $72 but car is at the shop and is probably easier to just get it there.
|
#4
|
||||
|
||||
Yeeeeeeesssss,
I suppose it's always easier to allow the Dealer to "Do it."
'Problem is ,My Wallet screamed so Loud back in 1986, (Last Time I Paid a MB dealer for any Kind of Service) I Cannot drive into a dealer's service lane without going Deaf and have to back out into the street,drive home and fix whatever it is myself.
__________________
'84 300SD sold 124.128 |
#5
|
|||
|
|||
I have not taken any cars to the dealership, except when they sent me a free oil change coupon. Even then, I hestitate as I need to drop off the car and it is just as easy for me to do it myself at home for $20.
This is my experience for the hose. I actually repaired one myself with great success. The hose had a nick near the recv/dryer and I could not cut and joint it together with hose clamps. The joint would not be strong enough even with a metal insert. There are 2 points of failures. So I decided to cut the hose all the way to the press-fit metal bracket, got the same section from a junk yard for pennies, inserted into the metal hose and put a single hose clamp round it. Put some RTV inside and out for good measures and it has been working fine since. It only has one point of failure. I could cut the metal hose and weld it but I could not do welding and do not have the gear. I could remove the whole hose from the junk yard but it is a PITA to remove it all the way from the expension valve even if I butchered everything in between. I bet your labor costs will not be cheap, plus the parts on top. As a matter of interest, how much it is going to cost.
__________________
Not MBZ nor A/C trained professional but a die-hard DIY and green engineer. Use the info at your own peril. Picked up 2 Infractions because of disagreements. NOW reversed. W124 Keyless remote, PM for details. http://www.peachparts.com/shopforum/mercedes-used-parts-sale-wanted/334620-fs-w124-chasis-keyless-remote-%2450-shipped.html 1 X 2006 CDI 1 x 87 300SDL 1 x 87 300D 1 x 87 300TDT wagon 1 x 83 300D 1 x 84 190D ( 5 sp ) - All R134 converted + keyless entry. |
Bookmarks |
|
|