Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-10-2009, 12:26 PM
Registered User
 
Join Date: May 2002
Location: Jacksonville, FL
Posts: 1,142
500k badge..how to install

I received my 500K badge and cannot figure out how to install it. Am I missing a part or something? There is the badge, the plate with the numbers, two studs with nuts and the rubber washers.

Was there also supposed a mounting plate that goes behind the grill that the studs would pass through?

Anyone have a picture of the back of the badge as installed?

Reply With Quote
  #2  
Old 07-10-2009, 01:02 PM
rrgrassi's Avatar
mmmmmm Diesel...
 
Join Date: Jun 2006
Location: Royse City Tx
Posts: 5,177
My 250k badge had a plastic mounting plate included. Maybe they forgot to add that.
__________________
RRGrassi


70's Southern Pacific #5608 Fairmont A-4 MOW car

13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete.

91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K

90 Dodge D250 5.9 Cummins/5 speed. 400K
Reply With Quote
  #3  
Old 07-10-2009, 01:08 PM
Registered User
 
Join Date: May 2002
Location: Jacksonville, FL
Posts: 1,142
Just spoke with MB Classic and they said the plastic mounts are on back order and they might have shipped the badges without them. I did not see the plastic tabs in the boxes. Maybe I can make my own. They said they'll ship them when they come back in stock.....

I guess they should look like these, are there 2 per badge?


http://www.peachparts.com/shopforum/vbpicgallery.php?do=big&p=2170#photo
Reply With Quote
  #4  
Old 07-10-2009, 01:21 PM
mike-81-240d's Avatar
I like coffee
 
Join Date: Mar 2009
Location: Bellevue, WA
Posts: 872
Quote:
Originally Posted by neumann View Post
Just spoke with MB Classic and they said the plastic mounts are on back order and they might have shipped the badges without them. I did not see the plastic tabs in the boxes. Maybe I can make my own. They said they'll ship them when they come back in stock.....

I guess they should look like these, are there 2 per badge?


http://www.peachparts.com/shopforum/vbpicgallery.php?do=big&p=2170#photo
How long did it take to arrive since you ordered at the dealer?
Reply With Quote
  #5  
Old 07-10-2009, 01:29 PM
rrgrassi's Avatar
mmmmmm Diesel...
 
Join Date: Jun 2006
Location: Royse City Tx
Posts: 5,177
Quote:
Originally Posted by neumann View Post
Just spoke with MB Classic and they said the plastic mounts are on back order and they might have shipped the badges without them. I did not see the plastic tabs in the boxes. Maybe I can make my own. They said they'll ship them when they come back in stock.....

I guess they should look like these, are there 2 per badge?


http://www.peachparts.com/shopforum/vbpicgallery.php?do=big&p=2170#photo
That is them, except mine were a semi circle.
__________________
RRGrassi


70's Southern Pacific #5608 Fairmont A-4 MOW car

13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete.

91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K

90 Dodge D250 5.9 Cummins/5 speed. 400K
Reply With Quote
  #6  
Old 07-10-2009, 03:31 PM
Registered User
 
Join Date: May 2002
Location: Jacksonville, FL
Posts: 1,142
Quote:
Originally Posted by mike-81-240d View Post
How long did it take to arrive since you ordered at the dealer?
Quite fast...maybe 2-3 weeks.
Reply With Quote
  #7  
Old 07-10-2009, 03:51 PM
Registered User
 
Join Date: Feb 2004
Location: Walnut Creek, CA & 1,150 miles S of Key West
Posts: 4,874
Make sure you check clearance of the studs. On my 99 I had to cut them to prevent them from hitting when the hood was closed.
__________________
Terry Allison
N. Calif. & Boca Chica, Panama

09' E320 Bluetec 77k (USA)
09' Hyundai Santa Fe Diesel 48k (S.A.)
Reply With Quote
  #8  
Old 07-10-2009, 04:58 PM
Jeremy5848's Avatar
Registered Biodiesel User
 
Join Date: Mar 2006
Location: Sonoma Wine Country
Posts: 8,402
Good point, I had the same problem with my '85 300D. With the studs snagged on whatever it was they snagged on, I couldn't open the hood.

You can use fender washers until the correct plastic piece shows up.
__________________

"Buster" in the '95

Our all-Diesel family
1996 E300D (W210) . .338,000 miles Wife's car
2005 E320 CDI . . 113,000 miles My car
Santa Rosa population 176,762 (2022)
Total. . . . . . . . . . . . 627,762
"Oh lord won't you buy me a Mercedes Benz."
-- Janis Joplin, October 1, 1970
Reply With Quote
  #9  
Old 07-10-2009, 06:11 PM
Registered User
 
Join Date: Apr 2003
Location: Phoenix Arizona. Ex Durban R.S.A.
Posts: 6,104
Quote:
Originally Posted by rrgrassi View Post
That is them, except mine were a semi circle.
I had one semi circle and one oblong like those. You could certainly fashion something that would do the job until the correct parts arrived.

- Peter.
__________________
2021 Chevrolet Spark
Formerly...
2000 GMC Sonoma
1981 240D 4spd stick. 347000 miles. Deceased Feb 14 2021
2002 Kia Rio. Worst crap on four wheels
1981 240D 4spd stick. 389000 miles.
1984 123 200
1979 116 280S
1972 Cadillac Sedan DeVille
1971 108 280S
Reply With Quote
  #10  
Old 07-10-2009, 09:21 PM
Registered User
 
Join Date: May 2002
Location: Jacksonville, FL
Posts: 1,142
Good call on the fender washers I'll see what I have lying around in the screw/bolt/etc dump all drawer.
Reply With Quote
  #11  
Old 07-10-2009, 09:41 PM
Fold on dotted line
 
Join Date: Aug 2007
Location: SE Mich
Posts: 3,284
Quote:
Originally Posted by neumann View Post
Just spoke with MB Classic and they said the plastic mounts are on back order and they might have shipped the badges without them. I did not see the plastic tabs in the boxes. Maybe I can make my own. They said they'll ship them when they come back in stock.....

I guess they should look like these, are there 2 per badge?


http://www.peachparts.com/shopforum/vbpicgallery.php?do=big&p=2170#photo

I'm disappointed. I bought one of the older MB 500K badges and wow they were nicer. Will dig one out and photo it.
I have seen the Canadian version of the 1,000,000 km badge and it's a cast work of art...

It's amazing to me how short-sighted and penny-pinching MBUSA can be when it comes to spectacular achievement.
__________________
Strelnik
Invest in America: Buy a Congressman!

1950 170SD
1951 Citroen 11BN
1953 Citroen 11BNF limo
1953 220a project
1959 180D
1960 190D
1960 Borgward Isabella TS 2dr
1983 240D daily driver
1983 380SL
1990 350SDL daily driver alt
3 x Citroen DS21M, down from 5
3 x Citroen 2CV, down from 6
Reply With Quote
  #12  
Old 07-10-2009, 11:13 PM
BodhiBenz1987's Avatar
Registered User
 
Join Date: Dec 2004
Location: East Coast
Posts: 3,005
My 500k badge came without the backing, too. I bought to rubber washers and used them to bolt it up on the back of the grille. Hasn't fallen off yet.
__________________
1987 300D, arctic white/palomino--314,000 miles
1978 240D 4-speed, Euro Delivery, light ivory/bamboo--370,000 miles
2005 Jeep Liberty CRD Limited, light khaki/slate--140,000 miles
2018 Chevy Cruze diesel, 6-speed manual, satin steel metallic/kalahari--19,000 miles
1982 Peugeot 505 diesel, 4-speed manual, blue/blue, 130,000 miles
1995 S320, black/parchment--34,000 miles (Dad's car)
Reply With Quote
  #13  
Old 07-11-2009, 07:01 PM
mike-81-240d's Avatar
I like coffee
 
Join Date: Mar 2009
Location: Bellevue, WA
Posts: 872
Quote:
Originally Posted by neumann View Post
Quite fast...maybe 2-3 weeks.
As of yesterday it has been 1 month, and i still haven't gotten my 155k mi badge, but i don't know who to call to figure out were it is.
Reply With Quote
  #14  
Old 07-11-2009, 07:57 PM
Registered User
 
Join Date: May 2007
Location: Out in the Boonies of Hot, Dry, Dusty, Windy Nevada
Posts: 9,673
when I orderd mine, I think it was about 3 weeks. I put in for the 250,000 and the 500,000 the same time. they came with the plastic piece`s as shown in the above picture. I think I had to shorten the studs some also.

later on I found one at PNP that was an older one, a 200,000KM. they made them better yrs ago, this one seems to be blue porcilin instead of paint and has two brass screws that go in from the front.

Charlie
__________________
there were three HP ratings on the OM616...

1) Not much power
2) Even less power
3) Not nearly enough power!! 240D w/auto

Anyone that thinks a 240D is slow drives too fast.

80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff

We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works
Reply With Quote
  #15  
Old 07-11-2009, 08:07 PM
79Mercy's Avatar
Registered User
 
Join Date: Mar 2008
Location: Florida
Posts: 4,131
Quote:
Originally Posted by neumann View Post
Just spoke with MB Classic and they said the plastic mounts are on back order and they might have shipped the badges without them. I did not see the plastic tabs in the boxes. Maybe I can make my own. They said they'll ship them when they come back in stock.....

I guess they should look like these, are there 2 per badge?


http://www.peachparts.com/shopforum/vbpicgallery.php?do=big&p=2170#photo
I just got Brumos to sign my form, so hopefully i'll get my badges with brackets within the next 4 weeks.

__________________
1985 300TD Turbo Euro-wagon
1979 280CE 225,200 miles
1985 300D Turbo 264,000 miles
1976 240D 190,000 miles
1979 300TD 220,000

GONE but not forgotten
1976 300D 195,300 miles
1983 300D Turbo 175,000 miles

http://i42.photobucket.com/albums/e3...e485-1-2-1.jpg
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 01:07 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page