|
|
|
|
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
w123 how to replace/remove/install spindle and ball joint on 1985 300d
i have a 1985 mercedes 300d turbo diesel, recently have been hit by a lowerd s10. i have to replace a driver side front fender and the spindle and ball joints, also have to replace both driver and passenger tie rods. i can rebuil the entire car except the suspension! i need to know how to remove and install the spindle and ball joints, also i need to know what tools i need i have only wrenches and ratchet set because i had to pay a court fine please help car is hard to drive and is our only car!
if you have very detailed insructions and tool list please email me a devenmp@yahoo.com NO SPAM PLEASE |
#2
|
||||
|
||||
Here is a link to the DIY section:
http://www.peachparts.com/shopforum/forumdisplay.php?f=82 You will need some pullers and a shop to replace the lower ball joint. Why do you have to pay a court fine if you were hit?
__________________
Regards Warren Currently 1965 220Sb, 2002 FORD Crown Vic Police Interceptor Had 1965 220SEb, 1967 230S, 280SE 4.5, 300SE (W126), 420SEL ENTER > = (HP RPN) Not part of the in-crowd since 1952. |
Bookmarks |
|
|