|
|
|
#1
|
|||
|
|||
shifting problem... 300SD
I have got a nice 300SD and am trying to take care of it!
The PO had adjusted the transmission bowden cable to be almost all the way out and my transmission shifts at about 3000 rpm. Sometimes especially when the engine is cold the car does not want to shift into 4th gear and oscillates between 3rd and 4th. If I put the pedal to the floor and ref the engine up it will shift at high refs. If I shorted the Bowden cable the oscillations start in the lower gears as well. I think I need to adjust the modulator and how? I will check the vacuum but I have to wait for my gauge. Any thoughts? Thanks... |
#2
|
||||
|
||||
Turn in the bowden cable nut, count the turns, and test drive.
__________________
83 SD 84 CD |
#3
|
||||
|
||||
... check and make sure the kick down switch is not shorted or stuck under the accelerator pedal...
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#4
|
||||
|
||||
Check fluid level as well...Does it slip when it is cold at all, like from a stop?
__________________
TC Current stable: - 2004 Mazda RALLYWANKEL - 2007 Saturn sky redline - 2004 Explorer...under surgery. Past: 135i, GTI, 300E, 300SD, 300SD, Stealth |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|