there is a service cover on the side of the pump, it is seeping oil as is one of the leaver points.
is there a gasket kit to change? or best to leave it leaking...

__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread
"as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do!

My drivers:
1987 190D 2.5Turbo
1987 190D 2.5Turbo
1987 190D 2.5-5SPEED!!!

1987 300TD
1987 300TD
1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!

there are a few covers.

main ones on bottom, back, and the driver's side

the shutoff lever is known to leak. There is an easy repair available.

__________________

I have a 92 300SD and is leaking at the rear, I did find some information on replacement gaskets and "O" rings. You have a side panel with four screws and a gasket, you may have a worn or crack gaskes that needs to be replace.

I believe someone posted a DIY (GSXR?).
[Yeah, 'cause it was mentioned changing out the "screwdriver-slot" heads for
Hex heads or Insert Allen.]

Any Bosch fuel shop can get the Gaskets with your I.P.# from the tag on the pump.

Here(?) :

Attached Thumbnails

 

__________________
'84 300SD sold
124.128