|
606 Glow Plug Question?
Hi! How can you test bad glow plugs? Thanks in advance!
|
Put an ohmeter on low range from the post to the body. A couple of ohms indicates good glow plug. Infinite resistance indicates bad glow plug. They are like light bulbs...either they're good or bad...no in between
|
Thanks for the info.
|
DieselGiant.com has a pictorial/write up for checking the W123 GP's and relay for the electrically impaired. Is the same principals for ours only the relay is built differently.
|
Thanks again!!!
|
My last bad glow plug tested at 16 ohms, and I have seen other failed glow plugs with similar resistance. A good plug on the 606 should test at about 1.5 ohms. Not all failure modes give the infinite resistance of an open circuit.
|
| All times are GMT -4. The time now is 10:11 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website