Swapping out the plastic trim on the center console for a zebrano wood version. In the process I had the connector for the left rear window pop apart and the wires all fell out. Also, 2 more wires located mid-switch (safety switch?).

I think with some searching I can figure out which wires go where... But in the meantime none of my windows go up or down. Not even the right side windows which are connected properly. Did I pop a fuse, or do all windows stay inoperable until all wires are re-connected?

Are there multiple fuses or just 1 for all windows?

Many thanks guys

ZC

ps: if you have a clear wiring diagram, or know where one exists, I'd very much appreciate that time saver as well....

The windows are fused in pairs; diagonally opposite windows are on the same fuse.

You can find the fuse layout here.

http://www.peachparts.com/shopforum/showthread.php?t=242913&highlight=w123+fuse

__________________
1985 300D 198K sold
1982 300D 202K
1989 300E 125K
1992 940T

"If you dont have time to do it safely, you dont have time to do it"

"The democracy will cease to exist when you take away from those who are willing to work and give to those who would not."