|
|
|
#1
|
|||
|
|||
98 E300 Tranny shifter vibration noise.
At 1700 rpm's in drive I'm getting a strange noise. If I move the shifter left to 4th the noise is gone. Squirting the shifter slot with WD-40, no change. Any ideas?
|
#2
|
|||
|
|||
replace the shifter bushings. they look like O-rings.
__________________
92 300D 2.5L OM602 OBK #59 |
#3
|
|||
|
|||
Mine are green, and if your hands are bigger than a 3y/o's you'll need 12" needle nose pliers to help you out.
__________________
Terry Allison N. Calif. & Boca Chica, Panama 09' E320 Bluetec 77k (USA) 09' Hyundai Santa Fe Diesel 48k (S.A.) |
#4
|
|||
|
|||
Do I get a kit or set from the dealer & do they install from the console or under the car?
|
#5
|
|||
|
|||
They are in the trans/drive shaft tunnel; you'll see them on the drivers side of the trans after removing the trans belly pan.
Fastlane has them (our host, link above); as does every dealer.
__________________
Terry Allison N. Calif. & Boca Chica, Panama 09' E320 Bluetec 77k (USA) 09' Hyundai Santa Fe Diesel 48k (S.A.) |
#6
|
|||
|
|||
Thanks for the help guys.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|