PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Diesel Discussion (http://www.peachparts.com/shopforum/forumdisplay.php?f=15)
-   -   Window regulator and guide rail lube question (http://www.peachparts.com/shopforum/showthread.php?t=281941)

drgreenthumb 07-29-2010 06:29 AM

Window regulator and guide rail lube question
 
What do you guys use to lube the window regulator and guide rails? I have just replaced one of the guide clips and am ready to put the door panel back on. It looks like graphite was the original lube. Would grease hold up better?

This is on a W124 btw.

Chris W. 07-29-2010 12:12 PM

I used white lithium grease from a spray can on mine. Messy, but so far so good a few years later. Was it your right rear window, by chance? Those seem to be the first to go.

Rgds,
Chris W.
'95 E300D, 319K

drgreenthumb 07-29-2010 12:21 PM

Quote:

Originally Posted by Chris W. (Post 2515045)
Was it your right rear window, by chance? Those seem to be the first to go.

Rgds,
Chris W.
'95 E300D, 319K

The regulator is fine, it was the plastic clip that rides in the vertical guide rail that was busted. I was tired of hearing things rattle in my door when they are closed. I did find several posts about the passenger rear window regulator though.

Why did you use white lithium grease vs another type of grease?

hey_allen 07-29-2010 08:05 PM

I ended up using some chain and slide grease, but I'm not sure just how well it'll work in the long run, as I just did this on one of my windows this month.

snookwhaler 07-29-2010 08:13 PM

Super Lube

I have not pulled my rears yet. But, eventually I wan to pull them and do the "plate mod." on the regulator. Then lube it all with Super Lube.

Renntag 08-13-2010 11:57 AM

Quote:

Originally Posted by snookwhaler (Post 2515264)
Super Lube

I have not pulled my rears yet. But, eventually I wan to pull them and do the "plate mod." on the regulator. Then lube it all with Super Lube.

Plate mod?

Are you referring to your W123 TD or a W124? ( I have both).


I am searching for more info to simply get the damn right rear door panel off to get the window working again ! Screws out, arm rest bolt out, ash try and light removed, trim around latch removed, lock knob removed, speaker removed, I cant get this damn panel to slide upward to save my life. :eek:

Maxbumpo 06-20-2011 07:42 AM

Old post I know, but hoping someone has the answer. What is the part number for the plastic slide on a W124 rear window regulator? I think that 210 720 00 42 may be the part.

compress ignite 06-20-2011 01:20 PM

Plastico,rectangle slider
 
3 Attachment(s)
Max,


[Third and Forth are the 210 XXX XX XX part number]
(EPC only shows usage on W210 and W202 Chassis)

[Fifth pictogram is the 126 XXX XX XX part number]

Maxbumpo 06-21-2011 07:01 AM

Yep, found this thread in another forum which describes how to use the 210 part in a 124 rear window, will also work for a 201.

http://www.benzworld.org/forums/w210-e-class/1332991-kajtek1-window-regulator-question.html

compress ignite 06-21-2011 04:22 PM

Plastic Rectangular Window Lift sliders
 
Excellent detective work.
Another Available Option.

Thank You!

Junkman 06-21-2011 05:34 PM

I bought some slides for my SD from..................PeachParts. They were in stock and inexpensive. Give a call.


All times are GMT -4. The time now is 07:55 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website