|
|
|
#1
|
|||
|
|||
1985 300D Vacuum issues Help
This morning I was changing the steering gear box, and in the mean time I unplugged a bunch of the vacuum lines that are right above the gear box. I hooked up most of them but there are a couple that I am not sure how to hook up. I was wondering that if someone could take a photo is they have the same model so that I could rearrange everything the right way.
|
#2
|
||||
|
||||
I have the egr bypassed and a line or two is missing, otherwise stock.
__________________
83 SD 84 CD |
#3
|
|||
|
|||
mine looks a little bit different i think here is what i have. There 2 ports that I am not sure where to hook up.
|
#4
|
|||
|
|||
The car also does not shut off as well. I havent tried to drive it yet so not sure how the transmission will shift either.
|
#5
|
||||
|
||||
^ I understand why it doesn't want to shut off, there is an open "distributor" on the line that goes to a four way which goes to a check valve, a green line and a brown line, this is allowing a leak where there shouldn't be one.
That is an unusual set up, but 85's are a bit different. The attachment is from someone here that shows how to bypass the egr on an 85. But it also shows the factory routing.
__________________
83 SD 84 CD |
Bookmarks |
|
|