|
|
|
#1
|
||||
|
||||
alda was removed on my "new" 87300D
the car smokes black on hard launches, just a puff not a huge cloud. should I get an alda back on there?
the car is REALLY crisp, but I'm certain fuel economy will suffer.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#2
|
|||
|
|||
You are in the he same boat I am in...it was such a change when I removed mine! Apparently that means that it was not functioning properly in the first place...I have been trying to figure out how to make a custom ALDA with very little luck. Someone also had a write-up on how to repair the seals in the original.
__________________
1987 300TDT - 195,000 (Original #14 head) 1993 190E 2.3 - 105,000 1981 300D - 250,000 |
#3
|
|||
|
|||
There is nothing to repair. Bosch does not sell the seal and the bellows inside are garbage if they become vented.
|
#4
|
|||
|
|||
Someone however had a writeup on and Oring that seemed to work...there were pictures with a guide and everything.
__________________
1987 300TDT - 195,000 (Original #14 head) 1993 190E 2.3 - 105,000 1981 300D - 250,000 |
#5
|
||||
|
||||
Just drive like a sane man and all is well in the universe. Mine has been off for years.
Do I drop the hammer at times from a dead stop? Sure, just a black cloud puffs out the back.
__________________
I'm not a doctor, but I'll have a look. '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] |
#6
|
|||
|
|||
I was thinking that too, but even at idle mine smokes quite a bit...I am sure it is hurting my fuel economy now. So I will be getting one put on it and just turning it up as soon as I get chance.
__________________
1987 300TDT - 195,000 (Original #14 head) 1993 190E 2.3 - 105,000 1981 300D - 250,000 |
#7
|
|||
|
|||
Idle smoke would be something other than the ALDA.
|
#8
|
||||
|
||||
I don't like the open point on the IP... it looks bad, and it could be a ingress for contaminants. also, the threads are developing rust... I hate rust on an engine!
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#9
|
||||
|
||||
Quote:
A member on here made me an ALDA removal cap. I will get you his info if you want it.
__________________
I'm not a doctor, but I'll have a look. '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] |
#10
|
||||
|
||||
COOL!
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#11
|
||||
|
||||
No way I would ever put my ALDA back on. I still have it, so if I sell the car it will go with it if the new owner wants it.
I, too, had a problem with smoking at idle. Never could figure out why, it just stopped on its own after a couple of oil changes(??). Your foot is your friend if you want to lessen the smoke at take-off. But I am still averaging 30 -+ mpg on trips. As far as I can tell, removing the ALDA has not affected my mpg. The cap thing is a good idea. I will be watching to see who it is that is making the caps...
__________________
1987 300DT 2002 Ford F-250 7.3 Crew Cab Short Bed |
#12
|
||||
|
||||
werminghausen
Sixto 87 300D |
#13
|
|||
|
|||
The shaft has its own seal and it doesn't move without the ALDA, there is no way for contamination to get in.
|
#14
|
||||
|
||||
well that's good.
it still LOOKS crappy!
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#15
|
||||
|
||||
I recommend shimming the alda. The crush washers from the banjo likes for the oil or trans cooler worked like a champ on my w123. I cant wait to adjust my ALDA.
__________________
http://superturbodiesel.com/images/sig.04.10.jpg 1995 E420 Schwarz 1995 E300 Weiss #1987 300D Sturmmachine #1991 300D Nearly Perfect #1994 E320 Cabriolet #1995 E320 Touring #1985 300D Sedan OBK #42 |
Bookmarks |
|
|