PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Diesel Discussion (http://www.peachparts.com/shopforum/forumdisplay.php?f=15)
-   -   Re-assembling the monovalve guts (http://www.peachparts.com/shopforum/showthread.php?t=292874)

mikeyfev1 01-25-2011 10:48 PM
Re-assembling the monovalve guts
 
All,

I am attempting to re-assemble the internal monovalve parts on my 1985 300D (I got a replacement central cylinder with good rubber).

I don't know the washer/circular spring installation order. In order of sliding onto the central cylinder, is it:
  1. Thick washer
  2. Thin washer
  3. Circular spring
  4. Medium washer
? TIA!

mikeyfev1 01-26-2011 01:02 AM
Yea, I was wrong. It is:
  1. Medium thick washer
  2. Circular spring
  3. Thin washer
  4. Thick Washer
This causes the thick washer to butt-up against the matching thick metal housing that surrounds the coil. The pressure of the 4 screws slightly compresses the circular spring to keep constant pressure on the large diaphragm to seat it in the valve body.

Renntag 01-26-2011 10:15 AM
Did you get pictures of this assembly order for our visual learners ? ;)


All times are GMT -4. The time now is 06:05 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website