|
|
|
#1
|
|||
|
|||
Philly-Need Tool! 46mm Socket, glow plug reamer!
Hi all
I am looking for a glow plug reamer and 46 mm socket for removing the in-tank Fuel tank strainer on my 1983 240D ! If the owner of said tools is anywhere close by, I'm one hell of a baker in exchange for an inside space to work on my Car. Thanks All, Nicole Last edited by whunter; 02-08-2011 at 05:33 PM. Reason: part name + added picture |
#2
|
||||
|
||||
__________________
1987 300D (230,000 mi on a #14 head-watching the temp gauge and keeping the ghost in the machine) Raleigh NC - Home of deep fried sushi! |
#3
|
||||
|
||||
I have a ratchet set that has that socket, and I used my 7 mm drill bit to do the reaming.
I posted pics and it worked like a champ. Send me a PM, I live between 76 and 676.
__________________
Current Diesels: 1981 240D (73K) 1982 300CD (169k) 1985 190D (169k) 1991 350SD (113k) 1991 350SD (206k) 1991 300D (228k) 1993 300SD (291k) 1993 300D 2.5T (338k) 1996 Dodge Ram CTD (442k) 1996 Dodge Ram CTD (265k) Past Diesels: 1983 300D (228K) 1985 300D (233K) Last edited by whunter; 02-08-2011 at 06:32 PM. Reason: spelling |
#4
|
||||
|
||||
here is one on ebay. 10.95.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=120443282369&viewitem=#vi-content
__________________
83 300TD (need rear wiper assembly dead or alive) 84 300SD Daily driver 85 300TD almost 400k miles and driven daily. 98 E300D *sold 86 300SDL *sold and made flawless 10 hour journey to new home. |
#5
|
|||
|
|||
A few years ago harbor freight had this MASSIVE socket set on sale for 39.00 (now its only 49) and there was a 46mm.
I bought it for the same thing you want it for. I use them often for the bigger nuts esp the OIL FILTER.. Im sure you can grab it on sale for 39 if you get on the mailing list. http://www.harborfreight.com/21-piece-metric-3-4-quarter-inch-heavy-duty-socket-set-5494.html As far as a reamer... I used a 45 cal pistol brush to ream out my glow plug holes... Used some liquid wrench as well... Then Id get a long piece of old t-shirt and softly push it to get any other gunk off.. I did make sure it was a LONG piece so nothing could fall in...HAHA |
#6
|
||||
|
||||
Out here they have cheapie tool places. The 1-13/16" socket subs for the 46mm one and it cost me $4.50. You may have similar places in your area that sells them.
__________________
84 300D, 82 Volvo 244Gl Diesel |
#7
|
||||
|
||||
Quote:
__________________
84 300D, 82 Volvo 244Gl Diesel |
Bookmarks |
|
|