|
|
|
#1
|
||||
|
||||
1980 w116 flex disc job. shaft won't come out
All the bolts came out easy enough. Pried river from metal and slid shaft forward
It is still not far enough to come of dif. Am i missing something? Yes center support is unbolted as well. HELP |
#2
|
|||
|
|||
Not sure what you mean by 'pried river from metal'. The one time I did this I had to use a pry bar with a fair amount of pressure to get that back flex disc free. Did you loosen the large nut at the joint in the shaft?
__________________
1977 300d 70k--sold 08 1985 300TD 185k+ 1984 307d 126k--sold 8/03 1985 409d 65k--sold 06 1984 300SD 315k--daughter's car 1979 300SD 122k--sold 2/11 1999 Fuso FG Expedition Camper 1993 GMC Sierra 6.5 TD 4x4 1982 Bluebird Wanderlodge CAT 3208--Sold 2/13 |
#3
|
||||
|
||||
river=rubber sorry
Both flex disk are loos
e. Big nut? Ohh no. Didnt know it moved. Thanks. |
#4
|
||||
|
||||
You need to loosen that big nut in the middle (not remove). It is a comression nut. Once it's slackened, you should be able to compress that shaft and should be able to work the river easily.
__________________
1989 300E 144K |
Bookmarks |
|
|