PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Diesel Discussion (http://www.peachparts.com/shopforum/forumdisplay.php?f=15)
-   -   Need to really slam door to get it to latch (http://www.peachparts.com/shopforum/showthread.php?t=295600)

azitizz 03-12-2011 01:24 PM

Need to really slam door to get it to latch
 
Any Ideas to help make a better latching on the two rear passenger doors? they had to be closed quite firmly to get it to latch completely. After someone backed into my rear passenger door (since been repaired) its even harder to close that side.
I have to really slam hard in order for it to latch. I feel like I could start causing more damage (perhaps to the window etc..) if it continues.
thanks for any ideas.

tangofox007 03-12-2011 04:16 PM

It might be time for new door strikers.
http://catalog.peachparts.com/ShopByVehicle.epc?q=&yearid=1982@@1982&makeid=63@@MERCEDES+BENZ@@X&modelid=6190%3AED%7C10000135%3AMB C%7C1504@@300D&catid=241766@@Body+Mechanical+%26+Trim&subcatid=241818@@Door+Striker+%2D+Front+Left&a pplicationid=W0133-1632135@@Door%20Striker%20-%20Front%20Left&mode=PA
Adjusting the existing door strikers might also help.

layback40 03-12-2011 08:42 PM

A little adjustment may help. Move the latch on the body frame out a little bit.

::matthew 03-12-2011 10:22 PM

look for the little tab on the bottom side of the striker- compare against the others. Also, I've had good success using a dry lube on the door side bits and pieces.

Junkman 03-12-2011 10:43 PM

Strikers are nearly free at the yards. Grab some extras when you go. Have you kept the hinges lubed? Are they out of adjustment?

JHZR2 03-13-2011 01:03 PM

How does one adjust the hinges?


All times are GMT -4. The time now is 06:28 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website