|
|
|
#1
|
||||
|
||||
Front regulators from 90's 350SDL will fit early 126's
the new design looks stronger, and has a wider perch that fits fine in the extra hole.
the motor sits in the opposite direction, but the window works! I also found out that the 85 inside door handle is a redesign of the early design that snaps... and it bolts in to an older design... and they are in stock NEW at the dealer! $20 is each!
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#2
|
||||
|
||||
notice the wider bolt pattern, and the motor pointing the opposite direction!
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#3
|
||||
|
||||
Hmm, I assumed they were all like that So the older design only used 2 mounting screws?
-J
__________________
1991 350SDL. 230,000 miles (new motor @ 150,000). Blown head gasket Tesla Model 3. 205,000 miles. Been to 48 states! Past: A fleet of VW TDIs.... including a V10,a Dieselgate Passat, and 2 ECOdiesels. 2014 Cadillac ELR 2013 Fiat 500E. |
#4
|
||||
|
||||
Any idea if
rear regulators are in the same boat? Need one, maybe two for my 1981 300SD...
Sure wouldn't mind a cheaper alternative...
__________________
Mine: 1987 MB 420 SEL - 62K (Dec 2019) Mine:1991 MB 350SDL - 244K (Aug 2011)- Totalled 9/14/2016 Mine:1981 MB 300SD - 326K mi (July 1997)-sold Wife's: 2008 MB C300 Sport - 92K mi (April 2009) |
#5
|
||||
|
||||
well, the rear glass is 3" wider, so it likely won't work.
all the regulators use 3 points to bolt in, but the SDL has the forward most bolt in a different location than the older SD's. look at my picture, see the bolt hole with the paint rubbed off it to the left of the nut that is tight? that's where the older regulators attach the third bolt.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
Bookmarks |
|
|