PeachParts Mercedes-Benz Forum
Page 2 of 2 1 2
Show 50 post(s) from this thread on one page

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Diesel Discussion (http://www.peachparts.com/shopforum/forumdisplay.php?f=15)
-   -   Divin' into the 116 ACC... (http://www.peachparts.com/shopforum/showthread.php?t=298536)

Doktor Bert 05-09-2011 02:27 PM
1 Attachment(s)
Yes,

The one on the side of the drier is the low pressure switch.

There should be a High Temp (pressure) switch in the TOP of the drier, (where it looks like someone has installed a rusty bolt) that turns on the auxiallary fan when the temp/pressure gets above a certain point.

The low pressure switch will short to ground and blow the #3 and #9 fuse in the DEF and AUTO LO/AUTO HI positions, but the system will work fine on heat.

I have attached a photo fo the drier on my W116 for reference.

E-mail me if you need to via my profile....Robert

Doktor Bert 01-03-2012 11:19 PM
Any source for the seal between the servo body and the heater hose manifold????


All times are GMT -4. The time now is 04:56 AM.
Page 2 of 2 1 2
Show 50 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website