|
|
|
#1
|
|||
|
|||
Cooling parts interchangeability 124-210
Hi, I unfortunately bottomed out my 99 E300D today. It was a pretty bad crunch. It bent back my radiator support bracket thus allowing the radiator to contact the fan.
So I am now in the market for a new radiator support, radiator, and fan shroud. If you have any of these please let me know. Now the question, I have a diesel, how many of these parts are interchangeable with the gassers(w210)? It's super hard to find any W210 in salvage yards(go Mercedes!) let alone a diesel. Just trying to cover my bases. Also, I have a good Radiator and shroud from a 87 300D, would that work? By monday I really need to have parts on order, cause this is my only vehicle. Thanks a ton guys
__________________
1980 240D(the first, 4spd) 1983 300D(WVO experiment) gave to my brother 1987 300D(sold with 360k+ miles on original #14 head) 1999 E300D 225k miles and counting |
#2
|
|||
|
|||
None of them are interchangeable. Well the radiator support is probably the same across 210s...
|
#3
|
|||
|
|||
Understood,
right now it's sporting a Valeo #210 500 2803 I thinking that's not the original radiator? I'm going to have to measure it when I pull it, cause their appears to be quit a few options; 533 x 533 x 488 mm core size, 612 x 612 x 488 mm core size, 640 x 640 x 492 mm core size, 641 x 641 x 496 mm core size, and that's only a few of the Behrs. all reasonably priced for a new Radiator. I think this is the support I'm looking for. WIS says I bolts it, but I don't see any mounting holes in the picture?
__________________
1980 240D(the first, 4spd) 1983 300D(WVO experiment) gave to my brother 1987 300D(sold with 360k+ miles on original #14 head) 1999 E300D 225k miles and counting Last edited by Geezer; 06-18-2011 at 11:28 PM. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|