Long story short - had an oiling problem and wiped #6 rod bearing - other bearings are fine. Have not been able to locate a single bearing - only sets. Does anyone have a rod bearing laying around that they are willing to sell?
Thanks,
Gene

That will be tricky, there are several sizes of "standard bearings" which are color coded as well as undersize bearings. When building those motors you have to measure the clearances and determine which of the "standard" bearings you need.

__________________

90 300TE 4-M
Turbo 103, T3/T04E 50 trim
T04B cover .60 AR
Stage 3 turbine .63 AR
A2W I/C, 40 LB/HR
MS2E, 60-2 Direct Coil Control
3" Exh, AEM W/B O2
Underdrive Alt. and P/S Pulleys,
Vented Rear Discs, .034 Booster.
3.07 diffs 1st Gear Start

90 300CE 104.980
Milled & ported head, 10.3:1 compression
197° intake cam w/20° advancer
Tuned CIS ECU
4° ignition advance
PCS TCM2000, built 722.6
600W networked suction fan
Sportline sway bars
V8 rear subframe, Quaife ATB 3.06 diff