|
|
|
#1
|
|||
|
|||
injection pump question
Bought the 82 300sd i posted about earlier. I was reading about adjusting the alda (possibly) by either changing the adjustment or shimming the alda. Went to inspect my pump, it appears to be non adjustable. The alda mounts with a large square plate and four bolts. The adjustment appears to be sealed and not serviceable. Pump may not be original, has yellow paint marks on the delivery valve yokes.
Am I missing something?
__________________
1982 300sd, new project car to restore It doesn't matter if you know what you're doing, as long as you look like you know what you're doing. |
#2
|
|||
|
|||
the gorillas 'round here tear the cap off to reach the adjustment nut on top of the ALDA
|
#3
|
||||
|
||||
Answer
Quote:
http://www.peachparts.com/shopforum/showthread.php?t=239597 .
__________________
ASE Master Mechanic asemastermechanic@juno.com Prototype R&D/testing: Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician. Noise Vibration and Harshness (NVH). Dynamometer. Heat exchanger durability. HV-A/C Climate Control. Vehicle build. Fleet Durability Technical Quality Auditor. Automotive Technical Writer 1985 300SD 1983 300D 1984 190D 2003 Volvo V70 2002 Honda Civic https://www.boldegoist.com/ |
Bookmarks |
|
|