|
|
|
#1
|
||||
|
||||
QUICK HELP NEEDED! Bolt Torque Values - LCA
So after 65 minutes of plowing through the MB Service Manual CD, I give up. I need the torque values for the following bolts:
Guide Rod Bolt in LCA Shock Absorber Mount Bolts (lower and upper) Spring Mount Plate Bolts (I assume Guten Tighte but want to be sure). LCA Bushing/Eccentric Pin Bolt I did find that the three Guide Rod Mount Bolts should be 35nm. I'm getting ready to tear down the front end in a few minutes (thats why I'm in a hurry). Thanks!
__________________
1991 300D 2.5 "Rocinante" 2002 Golf TDI "Teen Spirit" -------------------- 1984 300D 1966 Mustang I6 3sp 1985 Mazda RX-7 GSLSE 1982 Toyota Supra 1977 Datsun 280z 1971 Datsun 240z |
#2
|
||||
|
||||
after <4 minutes looking in the paper version of the service manual :
guide rod bolt in lower control arm: 50Nm (tightened after the 3 bolts holding the support to the frame are tightened and the eccentric bolt is installed through the bushing) shock absorber -upper: tighten to bottom of threads (then tighten lock nut). don't allow shaft to rotate -lower: 20Nm spring pad bolts: 20Nm eccentric/bushing bolt/nut: 180Nm (after vehicle has been lowered) this can be found in section 33-512 of volume 1 of chassis and body model 123. hope this helps. i love paper service manuals for this very reason. |
Bookmarks |
|
|