|
|
|
#1
|
|||
|
|||
Turbo conversion?
Anyone ever tackle a non turbo to turbo conversion? There is a few donor cars around her I could use.... Is it a bolt on type or is the compression different?
Thanks!
__________________
Brownie' 81 300D Auto Engin'r..... |
#2
|
||||
|
||||
I'm guessing you are talking about OM617 to OM617a?
If so you'll find loads of information on the forum about it. Most people will say just go and buy a turbo engine. If you want to do the same job as Mercedes you should have a look at the following SAE publication The Turbocharged Five-Cylinder Diesel Engine for the Mercedes-Benz 300 SD You might be able to obtain it a no cost via your local library. There is information about this publication here OM617 SAE Paper There are a few people who have made some conversions to their normally aspirated (N/A) om617s and you'll find most of these threads in the diesel performance section Diesel Performance Tuning - PeachParts Mercedes ShopForum
__________________
1992 W201 190E 1.8 171,000 km - Daily driver 1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone 1965 Land Rover Series 2a Station Wagon CIS recovery therapy! 1961 Volvo PV544 Bare metal rat rod-ish thing I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior Don't leave that there - I'll take it to bits! |
Bookmarks |
|
|