|
|
|
#1
|
|||
|
|||
Wiring help needed
my son and I put a 603 engine and tranny from a 300d into an 85 380se limosine. i need to know how to wire the idle control.we have 3 300d in yard and 1 sdl to get parts from.thanx
|
#2
|
|||
|
|||
help
70 views and no answers.....come on guys
|
#3
|
|||
|
|||
Get a manual to study the setup. My first inclination is just to provide a self variable voltage source to vary the idle.Or more likely set it where you want it.
It will just be not variable as fed from the computor that was in the 603 car. First establishing what was a normal voltage range when operated by the computor. Otherwise you probably will have to incorporate the 603 diesel electronics. I suspect without really knowing it reads the rpm and automatically corrects the idle. Wait until others with superior knowledge come on your site. Not only have I never worked or seen this setup personally. What I quote is just suspicion and guesswork at best. |
#4
|
|||
|
|||
Sundays can be kind of slow. Give it a bump on Monday morning.
|
#5
|
|||
|
|||
Yeah, I guess you could use a variable resistor to set the proper voltage. Get a wire from a fused connection in the fuse box, run it to a Variable Resistor/Potentiometer then to the unit.
You must match voltage and current requirements of the unit.
__________________
Codifex 1981 240D ChinaBlue (Got her running with a donor engine.) 1983 300DTurbo w/sunroof. 1984 300TD manual sunroof. (Electrical Gremlins) |
#6
|
||||
|
||||
Whoops
The EDS (Electronic Diesel System,A.K.A. Engine CPU) in the Originally equipped
OM603.XXX chassis Controlled the Idle. I suppose you could get an EDS unit from a 603 Donor and wire it up with all the necessary inputs to run your idle...An awful lot of work,and Uncharted Waters. The OM603 I.P. idle can be set Mechanically with the bolt (With locking Nut) that's above the Electronic Actuator on the back of the I.P.
__________________
'84 300SD sold 124.128 |
#7
|
|||
|
|||
thanx
thanx for your help.I got one ride in the back of limo before we pulled the engine and cant wait to cruise it again.thanx again
|
#8
|
|||
|
|||
ttt
bump
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|