Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 12-05-2011, 07:32 PM
thebenstenator's Avatar
Registered User
 
Join Date: Jan 2007
Posts: 89
W124 Fuel/Smoke Issues

Ok, So short story of what's recently happened to my car. (Just before I start I'll just mention that I did all R&R stuff at home, no shops). Recently I discovered that the head was cracked. I had taken it off and to a machine shop and it was indeed cracked. So I looked around for one and eventually found one at a junkyard, bought it, took it back to the same machine shop, they did a full valve job, planed it, made it look all nice and a pressure test just to make sure it was ok, and it was/is.
When I got it back they gave it to me with some parts out of it that I didn't know were removable (where the injectors actually screw in. They gave me the special tool that they had to use to remove them). So I put it all back together at home, put the head back on and got everything in order. It started great, first time. I was very pleased.
In the owners manual it says that the coolant system holds 10 liters or quarts or something. I had emptied out everything, even the radiator, on this head job so I figured I'd be putting exactly 10 quarts in there. Alas 10 quarts did not fit. I filled up the radiator by using the hose that goes from the top of the radiator to the head, then I started pouring the fluid in through the overflow container, until it was full. I figured that once the engine got hot and the thermostat opened up it would suck more fluid through and I could put the rest in. That didn't happen. Then I thought that there might be air bubbles in the system and that if I ran the car with the overflow cap off it might purge out the air bubbles.
While I was doing this, I noticed a lot of white smoke was coming out of the tail pipe and that on the 5th (I believe, either the 5th or the 1st, feel free to clarify) injector it was leaking fuel and bubbling.
Please see video for clarification.

Fuel-Smoke Issue - YouTube

phew, so much for being a short story.

But Anyway, I believe that much of the fuel leakage is coming from the black fuel lines that connect each of the injectors. The injector is wet all the way up. The metal fuel line is tight as I can get it.

My biggest question is about the white smoke and the bubbling coming up from underneath the injector.

It was THOSE pieces (underneath the injectors, that they actually screw into) that I had to install myself, could it be that maybe that one's not tight enough? Or could the injector not be tight enough? Or is there some other problem that could cause this?

The crush washers are installed, I'm pretty positive that I tightened ALL pieces (injectors, injector cup thingies [if anyone knows the actual name of those things... feel free to let me know]) to torque specs. I just didn't have the torque specs on those one pieces. . . (need name), but I got them ALL as tight as I could get them with a breaker bar, soooo, they should all be the same and the other ones don't have a problem.

Anyway, this is getting really long. Just trying to answer some questions before they're asked. Any input is appreciated, thanks and may all have a very Benzin Christmas, or any other holiday that you celebrate.
__________________
1992 300D OM602

Ben
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 09:12 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page