|
|
|
#1
|
||||
|
||||
I Think I've been "Hosed"
So, my trip to the dealer this time for the E300, since it decided to fall apart this past week, included the O rings for the fuel lines and the primary filter (the little guy) and Desperate need of injector return lines! Lucky he had some in stock actually!! (he was supprised he had it too) So i bought one meter and now I'm just looking for some time (might take a day off) I can do this. So, I'm sitting here and, 1 Meter is 39.37 inches? right? I'm missing about 3 inches!! If it didn't cost $20 for this stupid crap I wouldn't of thought twice. Think I can get those other 3 inches
(probably sounding like a real cheapskate about now Plus, I need to buy more anyway, why they have it, to put on the 240D's... its about time.
__________________
1983 Euro 240D 277K 2016 Mazda 6 Coming Soon, 2013 Mercedes E350 Bluetec Formers: 2012- Mazda 3 2007 Outlander- complete pile 1995 E300 Diesel 208K 2007 VW Passat 2.0T 63K SOLD 2003 Jaguar X-type 3.0 Sport Sold 04/11 w/88K 2009 Lexus RX350 9061 miles. Sold 04/09 2008 Mitsubishi Lancer GTS:Totaled Sept.,09 @ 24,000 2003 Infiniti I35 58K Sold 1984 300 turbo diesel 222K |
#2
|
||||
|
||||
I bought my return lines from the dealer and they had them in stock but had no fuel filter. I didnt think to measure them but I have extra left over.
__________________
1984 300SD Orient Red/ Palomino 1989 560SEC 2016 Mazda 6 6 speed manual 1995 Ford F-150 reg cab 4.9 5speed manual |
#3
|
||||
|
||||
Quote:
Actually last time I bought some they did the same to me. Maybe it's some parts joke we owners don't get....
__________________
Mac 2002 e320 4matic estate│1985 300d│1980 300td Previous: 1979 & 1982 & 1983 300sd │ 1982 240d “Let's take a drive into the middle of nowhere with a packet of Marlboro lights and talk about our lives.” ― Joseph Heller, Catch-22 |
#4
|
|||
|
|||
When I order the return lines and plastic vacuum line over the web I usually get 3 or 4 inches over the measure.
With dealerships I have also had such an experience.
__________________
2012 BMW X5 (Beef + Granite suspension model) 1995 E300D - The original humming machine (consumed by Flood 2017) 2000 E320 - The evolution (consumed by flood 2017) |
#5
|
||||
|
||||
There's a Russell Peters joke in there somewhere. Dealers sell hose by the meter and bean counters space the big filter so you need 42" of hose.
Sixto 87 300D |
#6
|
||||
|
||||
Quote:
It just occurred to me that I have actually seen parts guys 'measure' by using the arm-length trick (put the roll under the armpit and spool it out to the wrist). If this is how it's done, make sure to always deal with the tallest parts guy
__________________
Mac 2002 e320 4matic estate│1985 300d│1980 300td Previous: 1979 & 1982 & 1983 300sd │ 1982 240d “Let's take a drive into the middle of nowhere with a packet of Marlboro lights and talk about our lives.” ― Joseph Heller, Catch-22 |
#7
|
||||
|
||||
Reminds me of the old joke about why women are poor judges of length.....
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#8
|
|||
|
|||
Buy from this site. I haven't measured length but the roll received was always sufficient & much less than $20. I think ~ 50%. Get an order above $100 & get free shipping. Seeing the UPS pkg is almost as good as Christmas.
__________________
85SD 240K & stopped counting painted, putting bac together. 84SD 180,000. sold to a neighbor and member here but I forget his handle. The 84 is much improved from when I had it. 85TD beginning to repair to DD status. Lots of stuff to do. |
#9
|
||||
|
||||
Quote:
Should have taken a picture. |
#10
|
|||
|
|||
I just buy the 1/8" fuel line from Oreally's and that's always done the trick. I know it's not the OE solution but it's readily available and I don't have to drive out to the burbs to visit the dealer. It's also much less expensive IIRC. I always have 3-4' coiled up out in the garage.
steve
__________________
Steve A 92 W140 OM603 97 VW Jetta TDI 90 Passat variant TDI 6 speed MT 94 Chevy K1500 6.5TD 05 E320 CDI + others |
#11
|
|||
|
|||
I get the Viton stuff from Greaseworks
I usually get 20 ft or so. Have lots on hand since I have lots of vehicles & cycle through lots of it , was about $60 last time I got it, was actually cheaper than Mcmaster Carr. Cheers Dan
__________________
It's always something simple 91 300D 603.960 (from japan) 194K 92 Toyota Diesel Landcruiser HDJ81-t 116K 02 Golf TDI new head courtesy of PO 87 300D 97 BMW 525 TDS Wagon 5spd bunch of Onan and other diesel generators |
Bookmarks |
|
|