|
|
|
#1
|
|||
|
|||
300SDL Acclerator pedal replacement
Hello All,
The tab on the back of the accelerator pedal broke off on me yesterday and I am looking at replacing it. How does the pedal section attached to the floorboard come off? Thanks, A
__________________
1987 300SDL 187,000 miles |
#2
|
||||
|
||||
Quote:
To remove: There is a hollow metal tab that extends up from the floor and the pedal section is anchored to it by a small horizontal rubber clip/plug that passes through the bottom of the pedal section and the hollow metal tab. If the area is caked up with dirt it may not be obvious at first, use a brush to clean things off. Anyway the plug has tabs that must be squeezed together from behind, to push it out. You can then remove the pedal section.
__________________
Mac 2002 e320 4matic estate│1985 300d│1980 300td Previous: 1979 & 1982 & 1983 300sd │ 1982 240d “Let's take a drive into the middle of nowhere with a packet of Marlboro lights and talk about our lives.” ― Joseph Heller, Catch-22 |
#3
|
|||
|
|||
dirt
That could be why I cannot see anything because it was pretty dirty under the mat. Thank you for the info.
A
__________________
1987 300SDL 187,000 miles |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|