|
|
|
#1
|
||||
|
||||
what's the trick? 300d coolant sensor r&r?
it seems simple enough but i cannot get a socket onto the 'crown' of the sensor.
2 questions-- 1. what size of socket do i need (19mm?) 2. does anything else need to come off before i can do this? any tips are appreciated
__________________
Ben 1987 190d 2.5Turbo |
#2
|
|||
|
|||
Been a while since I removed one., but it is a 19mm, just checked. a deep 19mm socket is what you need for the clearance. but is too long to get a ratchet on it. how about using a gear wrench, but will need to remove the hard lines to make it easier.
Charlie
__________________
there were three HP ratings on the OM616... 1) Not much power 2) Even less power 3) Not nearly enough power!! 240D w/auto Anyone that thinks a 240D is slow drives too fast. 80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|