|
|
|
#1
|
||||
|
||||
Cracking pressure of delivery valves? Any year/model.
Question:
Has anyone actually measured the cracking pressure of the delivery valves when doing a timing drip test? I'm curious what it takes. Thanks!
__________________
-Evan Benz Fleet: 1968 UNIMOG 404.114 1998 E300 2008 E63 Non-Benz Fleet: 1992 Aerostar 1993 MR2 2000 F250 |
#2
|
|||
|
|||
Are you aware that the #1 delivery valve is not intact during a drip test?
|
#3
|
||||
|
||||
You need to look out for the Bosch manuals for that kind of data.
(I'll see what I can do)
__________________
1992 W201 190E 1.8 171,000 km - Daily driver 1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone 1965 Land Rover Series 2a Station Wagon CIS recovery therapy! 1961 Volvo PV544 Bare metal rat rod-ish thing I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior Don't leave that there - I'll take it to bits! |
#4
|
||||
|
||||
No I was not. I need to review the procedure, thanks.
__________________
-Evan Benz Fleet: 1968 UNIMOG 404.114 1998 E300 2008 E63 Non-Benz Fleet: 1992 Aerostar 1993 MR2 2000 F250 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|