PeachParts Mercedes-Benz Forum
Page 2 of 2 1 2
Show 50 post(s) from this thread on one page

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Diesel Discussion (http://www.peachparts.com/shopforum/forumdisplay.php?f=15)
-   -   Haynes manual Torque Specs ARE WAYYY WRONG!!!! (http://www.peachparts.com/shopforum/showthread.php?t=321406)

qwerty 07-15-2012 10:18 AM
Quote:
Originally Posted by The Gears (Post 2973652)
For the M12 bolt that holds the axle into the rear hub MB sm says 30nm
I think that converts to 22.13 ft/lbs. No way will that long thin bolt take that torque. Or did I read it wrong?
No way does a M12 bolt qualify as "thin." Unless you are working on a locomotive.

benzdude42 07-15-2012 09:13 PM
the book is not wrong you just looked in the wrong place! i did the same thing and broke mine off. its in part B of the engine chapter.


All times are GMT -4. The time now is 05:08 PM.
Page 2 of 2 1 2
Show 50 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website