|
|
|
#1
|
|||
|
|||
91 W124 serpentine belt tensioner offtracking ?
Hi,
91 W124 serpentine belt is tracking 1/8 " beyond flush on the serpentine belt tensioner pulley... I loosed the pulley checked bearing and tensioning action on the tensioner bracket ...alll seems tight and I cant readily tell what is causing this. The belt has not always been running in this position for two reasons . 1) I would have noticed and remembered 2) there is a dust/shine mark on the pulley that would correspond with a normal position/belt travel. has anyone run into this particular issue ? thanks ahead of time |
#2
|
||||
|
||||
Check the bolt / bearing in the tension lever. If its worn it can cause the tensioner pulley to be pulled towards the block causing the belt to track towards the front or even over the edge of the pulley.
|
Bookmarks |
|
|