|
|
|
#1
|
|||
|
|||
300td rear power window regulator removal?
hey! so, is there a special way or tool needed to remove the rear door power window regulator and motor? the front door were easy, but the rear doors seem to have little clearance for a wrench to access the mounting bolts on the motor. otherwise, the regulator will not budge with the motor still attached. any ideas would be very helpful. thanks again.
|
#2
|
||||
|
||||
year and/or body style (i.e. w123, w124) would be helpful. i know the w124 rear regs are much harder to remove. the w123 ones seem to be pretty easy
Quote:
__________________
0o==o0 James 4:8 "...let us put aside the blindness of mind of those who can conceive of nothing higher than what is known through the senses" -Saint Gregory Palamas, ---Discourse on the Holy Transfiguration of Our Lord God and Savior Jesus Christ Centrally located in North East Central Pa. |
#3
|
|||
|
|||
'84 300td w123.
|
#4
|
||||
|
||||
On a Sedan don't recall having any issues removing the Motor Bolts but the the Window had to be somewhere upwards to disconnect to remove the Rail that attached to the Window and that had to be done first.
__________________
84 300D, 82 Volvo 244Gl Diesel |
#5
|
|||
|
|||
yeah, these bolts are behind the gear of the regulator. so, it is almost impossible to remove them. i am going try again this evening.
|
#6
|
|||
|
|||
Got it! you need to be smarter than the window regulator!
|
Bookmarks |
|
|