Hey guys,




I want to set up a water injection system on my 1984 300D turbo. I've read all of the threads I can find on the subject. I've read a lot about how people have put them in and what can be expected from running it, but that's all I can find.

I'm very interested in doing this. I've found a lot of threads about people who have them and what results they get, but I cannot find any good threads about how to put one together or install. I know you need a container for the water, some kind of small water pump, and a nozzle.

That's about as vaugley as I understand it. I've read that some people say the nozzle is pretty basic, and others who say the nozzle needs to be pretty specific. These are the details I could use help with.

I'm not expecting a major performance increase, but I've read that water injection, over time, can really help clean the engine out and get it running a bit better, this is what i'm on for.

Does anyone know of a kit for this that might be useful? Or who can maybe link me up to some stuff that I can buy to do a DIY kit?

Thanks guys!

__________________
1984 Mercedes-Benz 300D

Hey Tony,

I posted on STD a very simple color graphic of the set up (generic / universal) system.

http://www.peachparts.com/shopforum/diesel-performance-tuning/233908-vaporised-alcohol-injection.html

There are a couple threads up in the performance section as well.

You want to make sure the water is misted early enough that it doesn't just get sucked into cylinder #1, or do a 5 injector setup.

__________________
$60 OM617 Blank Exhaust Flanges
$110 OM606 Blank Exhaust Flanges
No merc at the moment

Hey bud, where did you post it at? I'm looking all over STD, suppose I'm overlooking it. haha

Thanks for the link, I'll read through there. Thanks!

__________________
1984 Mercedes-Benz 300D

Water-Methanol Injection System

POST #25