|
|
|
#1
|
|||
|
|||
Delivery valve socket?
This is probably a longshot...
Is anyone here in Reno and, if so, do you have a the special splinned socket for removing the delivery valve holders on the OM603? Could I borrow/buy it from you? I haven't checked out prices online but its probably more than I want to pay for a one time use thing. Also I'd like to get it sooner rather than later. Also Im replacing a leaking power steering fluid return hose. The only hose ive been able to find here is a non-wrapped hose 10mm made by Parker rated to 350 psi and the guy told me it is rated to 250 degrees F. Will it work? The fluid shouldn't make it disintegrate eh? Cheers dieselheads!
__________________
'87 300TDT 150k |
#2
|
||||
|
||||
the return hose should be fine. pretty much any hydraulic hose will work. it's never got more than 10psi on it...
the socket is for sale in the tool section of this forum. around $30 I just bought one for myself, I've got 4 603's to rebuild... I think it's also available on the tool rental forum to borrow for like $5 plus shipping both ways...
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#3
|
||||
|
||||
This UK ebay seller has a good selection it seems.
motorsport-toolsuk
__________________
1985 300D 198K sold 1982 300D 202K 1989 300E 125K 1992 940T "If you dont have time to do it safely, you dont have time to do it" "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not." |
#4
|
|||
|
|||
The one on pelican parts is "no longer available".
__________________
'87 300TDT 150k |
#5
|
||||
|
||||
Samstagsales.com
|
#6
|
||||
|
||||
ordinarily I'd say call phil... I JUST ordered one from him two weeks ago... simply call the sales department and get it. http://www.pelicanparts.com/Mercedes-Benz/catalog/shopcart/TOOL/POR_TOOL_MERCED_pg19.htm
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#7
|
||||
|
||||
also, as mentioned earlier...
http://www.peachparts.com/shopforum/tool-rental-program/291660-tool-rental-master-member-list.html IP delivery valve, splined socket.....................pdrayton............................$5. IP delivery valve, splined socket.................redassag00..........................$10. IP delivery valve, splined socket....................dieselgreg.........................$10.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#8
|
|||
|
|||
Thanks. Are these sockets universal, fit 617, 602, 603 etc?
__________________
'87 300TDT 150k |
#9
|
||||
|
||||
The Socket fits M type Fuel Injection Pumps. I think that goes back to even the early 240Ds that don't have the MW IPs.
__________________
84 300D, 82 Volvo 244Gl Diesel |
#10
|
||||
|
||||
Yes,
I think 'Delivery Valve' indeed has a socket....
__________________
Did you just pass my 740 at 200 kmh in a 300SD????? 1978 300SD 'Phil' - 1,315,853 Miles And Counting - 1, 317,885 as of 12/27/2012 - 1,333,000 as of 05/10/2013, 1,337,850 as of July 15, 2013, 1,339,000 as of August 13, 2013 100,000 miles since June 2005 Overhaul - Sold January 25th, 2014 After 1,344,246 Miles & 20 Years of Ownership |
#11
|
||||
|
||||
Quote:
the MW pump has 6 sides DV valve holders... the M pump has the 32 spline holders...
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#12
|
||||
|
||||
I purchased a spline socket from my local Snap On dealer and it is like 1 or 2 teeth too big, maybe its for the w123.
|
#13
|
||||
|
||||
dv socket-frugal yankee edition
line up 2 shackles on a deep socket you don't care too much about, tack it on two sides & when it is cool, you are good to go.
__________________
1991 300D |
#14
|
||||
|
||||
This one will work. Laser Tool 5471 Fuel Injection Pump Socket 33 pt Spline 1/2"Drive
It is likely made in China but I have one and it is entirly adequate for the job. It is made of good Steel but the Torque on the Delivery Valve Holders is tiny. There was several Sockets in the Tool Rental Program. However, after paying the Rent and the Shipping back and forth you have come close to the price of buying the Laser version of the Socket.
__________________
84 300D, 82 Volvo 244Gl Diesel |
#15
|
||||
|
||||
Quote:
Miller Tool also makes their version for the Cummins. One of Our Members loaned Me an M type Fuel Injection Pump from a NA W123 and the splined Socket is the same as the Laser I mentioned and I also have a Hazet socket and they both fit that Fuel Injection Pump.
__________________
84 300D, 82 Volvo 244Gl Diesel |
Bookmarks |
|
|