|
|
|
#1
|
||||
|
||||
Torque Spec Banjo Bolts at Filter (14mm and 17mm heads)?
I recently chased a no start to a clogged banjo bolt and had to remove all three banjo bolts at the filter. I got replacement washers at the local MB dealer as all of them looked suspect. Anyway, I cannot seem to find the torque specs for those bolts (17mm (2) and 14mm (1)). I would appreciate the information.
Thank you.
__________________
Michael Southern California/Santa Monica 1986 MB 190D 2.5, 5 Speed Black and Palomino "Mordechai" 1985 Porsche 928S (32V), 5 Speed 1980 Porsche 928 (16V), 5 Speed |
#2
|
|||
|
|||
For reference, similar size banjo bolts on brake hoses (not necessarily MB brake hoses) get 13-14 ft/lbs. Consider that the fuel filter bolts are going into an aluminum housing, not cast iron.
|
#3
|
||||
|
||||
I always use a short wrench or choke up on a regular wrench to tighten small bolts particularly when going into aluminum.
__________________
85 Merc 300D - Unwinding 31 years of wear 86 VW TD Mahindra Diesel Iseki Diesel In 2007 I didn't own a diesel. |
Bookmarks |
|
|