Hello everyone!

I have an issue with my 1984 300D. I am refreshing the front of the car with the Euro Depot headlights. All of the lights seem to work except for the passanger side low beam. It is a brand new bulb and the wire connection is solid.

My car is a 'grey market' example and is had the federal conversion done to the lights to make them work for the 4 pin conntection, so I have all of the wires in the correct places according to the diagrams that I have found here and other forums.

There is a jumper running to the side markers, do I even need that and may that be part of my issue?

Thanks for the feedback!

_ DC Josh

Check your fuses. The lights have separate fuses. Spin them in their holder.
You'd be surprised.

__________________
'70 F100 shortbed
'82 Diesel Westy
'83 Euro 300TD
Curtlo Viper
Yeti ARC
Surly long haul trucker

The fuse was the issue. I should have looked at that, but I was working too late into the night and I did not think about the fuses.

I really appreciate these forums and the quick responses and information that is on here.

Thanks and I intent on making a proper introduction thread in the near future.

- DC Josh