PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Diesel Discussion (http://www.peachparts.com/shopforum/forumdisplay.php?f=15)
-   -   10mm Mandrel - where can I buy one? (http://www.peachparts.com/shopforum/showthread.php?t=340920)

HuskyMan 07-05-2013 04:51 PM
10mm Mandrel - where can I buy one?
 
I'm looking to purchase the 10mm Mandrel located on top of page 1033 (Item #10) of the following write up. I believe the size is 10mm X 150mm. Anyone have any ideas where I could purchase one?


http://www.startekinfo.com/StarTek/outside/12253/program/Chassis/41-200.pdf

mach4 07-05-2013 05:22 PM
1 Attachment(s)
Quote:
Originally Posted by HuskyMan (Post 3170918)
[SIZE=3]I'm looking to purchase the 10mm Mandrel located on top of page 1033 (Item #10) of the following write up... Anyone have any ideas where I could purchase one?
You can use any convenient metal pin. When I did mine, I used one of the punches from the Harbor Freight Long Drive Pin Punch Set About $7 for the set.

http://www.peachparts.com/shopforum/...1&d=1373059242

Diesel911 07-05-2013 09:06 PM
Does anyone think a 10mm Bolt with the threaded end cut off would work?

mach4 07-05-2013 09:27 PM
Quote:
Originally Posted by Diesel911 (Post 3171015)
Does anyone think a 10mm Bolt with the threaded end cut off would work?
Should work fine. And if not, no harm done, just use something else.

When I did mine, I looped some heavy wire through the drilled holes and attempted to use a slide hammer...no luck. Use pry bars and it will come right out.

Left Coast 07-05-2013 09:38 PM
I wouldn't be too concerned about the 10mm dimension. A piece of 3/8" steel rod, or a 3/8" bolt will do the job just as well. A 3/8" twist drill is also probably easier to find, and cheaper.


All times are GMT -4. The time now is 09:04 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website