|
|
|
#1
|
|||
|
|||
Stripped fan clutch bolt
Is it possible to just unbolt the pulley on the water pump or is the fan clutch bolt holding it all in? The fan clutch bolt head is stripped major bummer....how far does that bolt go in? 1986 300SDL om603
**update** grind it out! Last edited by megadiesel; 07-23-2013 at 07:39 PM. |
#2
|
|||
|
|||
What car/engine/year are you talking about?
__________________
CENSORED due to not family friendly words |
#3
|
|||
|
|||
oops 1986 300SDL
|
#4
|
|||
|
|||
Went through this repair a while back. The full length of the bolt is 2 1/8 inches including the Allen head. None of the McParts stores by me had the bolt. I went to the dealership and they had a replacement bolt in stock. The replacement bolt is a T55 Torx if i recall correctly.
|
#5
|
|||
|
|||
update
When all else fails grind that sucker out what a nightmare...
__________________
Diesel effcient |
#6
|
||||
|
||||
I guess you removed the radiator to get some clearance.
__________________
Jim |
#7
|
|||
|
|||
fan clutch
Yea had no choice no room at all...went to home depot and bough a somewhat smaller grinder as well which helped out alot....
__________________
Diesel effcient |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|