|
|
|
#1
|
|||
|
|||
Seat belt won't come out on 1977 300D
I've been working on fixing up a 77 300D (Finally got it to start and accelerate normally, without sticking) so now I'm starting to focus on the smaller stuff. The back right seat belt is stuck, and won't come out. It goes a little bit and pulls back in, but no more than an inch, and I'm not really sure how to go about fixing it... Any ideas? Also, the front left, and back right windows don't seem to be working, if anyones got a suggestion for that.
|
#2
|
|||
|
|||
The window switches are on the same fuse. L/F - R/ R and R/F - L/R.
Look at the card in your fuel panel lid at the top right and left. Replace the seat belt if it is starting to hang up. get one from the yards. (junk yard, PNP etc...) Charlie
__________________
there were three HP ratings on the OM616... 1) Not much power 2) Even less power 3) Not nearly enough power!! 240D w/auto Anyone that thinks a 240D is slow drives too fast. 80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|