PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Diesel Discussion (http://www.peachparts.com/shopforum/forumdisplay.php?f=15)
-   -   190d flywheel bolt torque specs (http://www.peachparts.com/shopforum/showthread.php?t=342567)

t walgamuth 08-15-2013 10:11 AM
190d flywheel bolt torque specs
 
anybody have the torque specs for the 85 190d flywheel for a stick?

Stretch 08-15-2013 10:26 AM
Assuming OM601

http://www.startekinfo.com/StarTek/outside/11832/Resources/201Create/PDF/60004.pdf

Any good?

Mike D 08-15-2013 11:12 AM
Or the alternate method favored by most back yard amachooers, "Tighten till it squeaks and then one half turn".:eek::D:D

t walgamuth 08-15-2013 11:44 AM
I found it one place....looks like 22 Ft lb., then turn 90 to 100 degrees for the stretch.

Mölyapina 08-15-2013 12:35 PM
Quote:
Originally Posted by Mike D (Post 3192517)
Or the alternate method favored by most back yard amachooers, "Tighten till it squeaks and then one half turn".:eek::D:D
Half-turn? Ha! Wth my arms, I can go three FULL TURNS past the squeak! Nothin' comes loose on my car NEVER!

t walgamuth 08-15-2013 07:31 PM
Flywheels all neutral?
 
So are all these 190 and 605 motors using neutrally balanced flywheels or is it an issue like the 123 cars?

winmutt 08-16-2013 09:20 AM
Neutral. Don't listen to the 190e people they have NFC what they are talking about.


All times are GMT -4. The time now is 07:46 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website