|
|
|
|
|
#1
01-20-2014, 08:20 PM
|
|||
|
|||
|
Suspension Redo ?s with pics 84300SD
I am almost done with the total suspension rebuild to my diesel. Just waiting for an install tool for the lower ball joints. I bought a set of new springs for the front that are Lesfors... that appear to be taller but thinner in spring diameter.
1st ?, will these compress to stock height, and the MB shims have 3 dimples. I bought new Meyle shims that are less thick. Should I use these instead of the stock ones. My goal is to achieve a stock appearance. Any input is appreciated. Ill try to upload some pics 
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
