|
|
|
#1
|
||||
|
||||
Why do I have exhaust gas coming out this port? 1993 300D
It has stopped for the time being, but it is concerning
__________________
1993 MB 300D 245K died. |
#2
|
||||
|
||||
Poor prechamber seal, or poor injector seal.
Injector sealing washers are cheap, try that first. If you *do* need to pull the PC, be sure to pull the glow plug first.
__________________
$60 OM617 Blank Exhaust Flanges $110 OM606 Blank Exhaust Flanges No merc at the moment |
#3
|
||||
|
||||
have new injectors coming, if it is a prechamber the head has to come off?
__________________
1993 MB 300D 245K died. |
#4
|
||||
|
||||
Nope. You can rent a fancy puller tool to get it out from the top. But you absolutely have to remove the glow plug first. Also, the PC seal and injector seal will need to be replaced.
__________________
$60 OM617 Blank Exhaust Flanges $110 OM606 Blank Exhaust Flanges No merc at the moment |
#5
|
||||
|
||||
found the seals thanks, can you look at may vac problem post?
__________________
1993 MB 300D 245K died. |
Bookmarks |
|
|