PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Diesel Discussion (http://www.peachparts.com/shopforum/forumdisplay.php?f=15)
-   -   Spec Needed: Plugging W126 OM603 Dipstick hole. Need size to source expansion plug (http://www.peachparts.com/shopforum/showthread.php?t=352621)

jusme 03-22-2014 07:09 PM
Spec Needed: Plugging W126 OM603 Dipstick hole. Need size to source expansion plug
 
Installing a 3.0L OM603 into a W140 chassis, a 1994 S350. The W140 oil pan uses a side mounted dipstick. So, I need to plug the front mounted hole behind the alternator bracket. Anyone have an idea on this? The engine is far away, so if anyone knows an approximate size, I can buy plugs in a range around that size.

Thanks guys!

jusme 03-22-2014 07:13 PM
Basically, if anyone has a front of engine mounted dipstick tube, I just need to know the OD. That's a much simpler request...:o

NJ300sdl 03-23-2014 10:24 PM
12MM measured at water pump.

jusme 03-28-2014 07:59 PM
Sweet! Thanks!!


All times are GMT -4. The time now is 04:14 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website