|
|
|
#1
|
||||
|
||||
Best source for window motor W126 SD
These seem to be astronomically priced if you can find them. Is there any reasonable source? Perhaps Gerry can hook us up with some uro parts
|
#2
|
||||
|
||||
I use Ebay for all my OEM parts
__________________
1999 w140, quit voting to old, and to old to fight, a god damned veteran |
#3
|
||||
|
||||
I see $140-$160 depending on location. Which window?
__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out. Check here for compatibility, diagnostics, and availability! (4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!) 82 300SD 145k 89 420SEL 210k 89 560SEL 118k 90 300SE 262k RIP 5/25/2010 90 560SEL 154k 91 300D 2.5 Turbo. 241k 93 190E 3.0 235k 93 300E 195k |
#4
|
||||
|
||||
Passenger side front. Thanks.
|
#5
|
||||
|
||||
So just where do you see those? Used OEM or new aftermarket or what? That seems a lot less than what I see in the new after market. I don't think I want a used one of any kind. And just what does a new OEM cost? Based on some of the new after market things I see it could be over $400. Any links to purchasable items? What is/are the OEM part number(s) I should be searching? Thanks !!
|
#6
|
||||
|
||||
Quote:
However, all the websites I looked had every window motor BUT the one you needed. Unfortunately... sorry. Edit: looks like we need to figure out which one you need. They have this Z= thing which I assume is teeth count 8,10, or 14... When I looked up prices for these guys from MB, they were $370 at the most. $250 at the least.
__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out. Check here for compatibility, diagnostics, and availability! (4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!) 82 300SD 145k 89 420SEL 210k 89 560SEL 118k 90 300SE 262k RIP 5/25/2010 90 560SEL 154k 91 300D 2.5 Turbo. 241k 93 190E 3.0 235k 93 300E 195k Last edited by JamesDean; 06-15-2014 at 05:22 PM. |
#7
|
||||
|
||||
Thank you, that is great information.
I guess I'll have narrow down the gear tooth number thing for starters. |
#8
|
||||
|
||||
From my recollection it looks most like probably 0048201542
The photo of a used one at this site is like it, but the pic of the gears side shows the cover plate attached so no counting will be had MOTOR WINDOW LIFTER - FRONT RIGHT MERCEDES-BENZ A0048201542 0028201842 0028208842 0048201542 0130821102 0130821220 A0028201842 A0028208842 A0048201542 |
#9
|
||||
|
||||
Post up your VIN, looks like the EPC has breakdown by ident.
The 004 unit you listed is $275 or so I think.
__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out. Check here for compatibility, diagnostics, and availability! (4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!) 82 300SD 145k 89 420SEL 210k 89 560SEL 118k 90 300SE 262k RIP 5/25/2010 90 560SEL 154k 91 300D 2.5 Turbo. 241k 93 190E 3.0 235k 93 300E 195k |
#10
|
||||
|
||||
Not even my ride. Helping a codger. My nearest dealer quotes over $400 for that, says it is the less expensive alternative of the 2 possibles. I might be able to find one on the web for about $200 delivered. I'd be happy to hear about less expensive alternatives. So now it is just a matter of spending $ Thank you for the help
|
#11
|
||||
|
||||
Now I need A 004 820 15 42 with Z=8 for my right front. Hard to find. I got lucky on the left with a NOS genuine MB a while back.
I think I found a hack: UPC: 080738880075 Brand: ACI/Maxair Manufacturer Part Number: 88007 It is the entire assembly including a new motor. And pretty cheap. $ 130.99 They have over 600 motors on their site but I can't find this one bare. All the retailers sell this. anyone have experience with ACI ? |
#12
|
||||
|
||||
What is breaking? Frame? Electric motor? Gear teeth?
Just curious. I’ve been repairing some old dead regulators recently by welding new teeth on the gears.
__________________
79 300TD “Old Smokey” AKA “The Mistake” (SOLD) 82 240D stick shift 335k miles (SOLD) 82 300SD 300k miles 85 300D Turbodiesel 170k miles |
#13
|
||||
|
||||
Always the electrical. Motor won't respond to voltage applied. This will be the first time I replace the entire regulator system. Last go around I ripped the old motor apart but couldn't pin point the reason for failure. almost 40 years takes a toll on a car ...
|
#14
|
||||
|
||||
Hah. Interesting. The w123 regulators I’m playing with have really robust motors and really flimsy mechanicals.
I’ll keep this in mind for my w126. Likely a burned out motor. It would be nice if it was a brush but I bet you’ve checked all the easy stuff already. The coil could likely be melted given the high current these motors draw.
__________________
79 300TD “Old Smokey” AKA “The Mistake” (SOLD) 82 240D stick shift 335k miles (SOLD) 82 300SD 300k miles 85 300D Turbodiesel 170k miles |
#15
|
||||
|
||||
Can you still find new motors for your model?
|
Bookmarks |
|
|